2-axle steel segment tipper semitrailer - wheelbase 1,810

  • Cost-effective alternative to tipper body on 4A truck
  • Flexibility in terms of choice of semitrailer tractor
  • Stable and torsionally rigid chassis construction with additional torsion tubes
  • Maximum stability thanks to automatic lowering device
  • Hard chrome-plated, high-quality front tilt cylinder
  • Specially canted Hardox body for maximum impact and wear protection
  • Optimum load distribution thanks to slanted front wall
  • Standing platform at front wall for operating roller tarpaulin
  • Installation of axles from well-known manufacturers such as SAF or BPW
  • OPTIONAL: External rear wall for higher load volume
  • OPTIONAL: lightweight segmental steel tipper with 4 mm floor thickness and 3 mm wall thickness - payload advantage approx. 300 kg
  • OPTIONAL: Special hinged rear wall for extra high opening with recessed mounting and automatic hydraulic operation
  • OPTIONAL: Roller cover - operated manually or via electric remote control

For rubble, excavated earth, etc. on building sites


Tipper body internal length: approx. 6,500 mm
Tipper body internal width: approx. 2,330 mm
Tipper body internal height: approx. 1,470 mm
= load volume: approx. 20.5 m³
Total width: 2,550 mm
Loading height, unladen: approx. 250 mm over fifth-wheel coupling


Naxtra welded steel frame construction = lightweight design
Replaceable 2" kingpin


Air suspension with autom. lowering device via inductive switch and lowering lock via rotary switch on semitrailer

air suspension unit with low-maintenance drum brake axles,
2 x 10 t rigid, wheelbase 1,810 mm
S-cam brake 420/200 mm, autom. brake linkage adjuster

Autom. lifting front axle = raised or lowered according to weight, as well as forced lowering incl. integr. speed-restricted moving-off aid with button operation in cab (no button installation on our part)

Tyres :
4 x 425/65 R 22.5 165K, manufacturer as per factory specifications
4 steel wheel rims 14.00 x 22.5, 10-hole, without rim offset, silver


2 steel support legs, height-adjustable (only detachable when unladen)


Brake system according to EC Directive 71/320 or EC E R13
Two-line brake
Spring-loaded parking brake
EBS - electronic brake system
Wabco 2S2M = one axle sensed
RSS - stability program
Steel air tank


1 HP front press for rearward tipping, tipping angle approx. 50°
1 pipe system with screw coupling DN20


24 V lighting system according to EC Directive 76/756/E WG
2 seven-chamber tail lights
LED side marker lights
2 clearance lamps
2 contour lights
2 x 7-pin and 1 x 15-pin socket


Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48


Wheel chock(s) as per regulations
Noise dampers = rubber pads
Foldable aluminium trapezoidal underride protection, unpainted
Single wheel plastic mudguards with spray protection as per regulations


Gross train weight (perm.): 38 t
Gross weight (techn.): 32 t
Axle assembly load (techn.): 20 t
Fifth-wheel load (techn.): 12 t
Payload: approx. 24 - 25 t
Tare weight: approx. 5. 6 t


Rear markings as per ECE standards


Complete steel body (incl. front and rear wall plus top belt) made of Hardox,
with reinforced top belt, floor thickness 5 mm, wall thickness 4 mm,
angled front and rear walls
Slanting front and rear walls, flush all over on top for roll cover
Rear wall = hinged wall with countersunk bearing and
automatic mechanical 2-hook central locking
Fixed discharge chute at rear = floor panels throughout

Steel standing platform with aluminium safety grate, with safety railing and steps,
on chassis frame


Plastic roll cover incl. aluminium tube, complete with hand crank, non-sealed,
Covers made as per factory specifications, cover colour subject to availability
Locking device for unrolled cover on right in direction of travel
Horizontal rope lashing cover bracket on the right side, zigzag lashing at front and back,
With 3 lashing straps on the left side incl. rubber pads, as well as
turnbuckles on the underside of the body
1 removable transverse support and stop bracket for roll cover on the right side

Inclined front wall with hard chrome-plated, high-grade front tilt cylinder
2-axle steel segment tipper semitrailer - wheelbase 1,810 mm
Axles with a wheelbase of 1,810 mm
OPTIONAL: External rear wall for higher load volume
Rear wall = hinged wall with recessed bearing and autom. mech. dual-hook central locking
OPTIONAL: Special hinged rear wall for extra high opening with recessed mounting and automatic hydraulic operation
Foldable aluminium trapezoidal underride protection
Stable and torsionally rigid chassis design with additional torsion tubes

Your Schwarzmüller contact persons

Always nearby. We are delighted to help.

Premium even at customer service

From maintenance to vehicle rental