Aluminium 3-axle large-scale tipper semitrailer

  • Stable and torsionally rigid chassis design with extra torsion shafts
  • Automatic lowering device for maximum stability
  • High-quality front tilt cylinder with four-point support
  • High-quality, hollow profile aluminium body for high resistance to impact and wear
  • Standing platform at front wall for operating the roller tarpaulin
  • Foldable, trapezoidal aluminium underride protection for practical filling of screw conveyors etc.
  • Grain feeder in door leaf with dosing lever and water guard plate
  • Axles from well-known manufacturers such as SAF or BPW
  • Combined rear wall - fully opening, centrally divided double door with hinged frame and automatic locking mechanism
  • Body sizes available for different cargo volumes
  • Inclining cambered roof bars for extra stability and protection against unwanted water pooling
  • OPTIONAL: Side-mounted control panel providing all control and monitoring elements
  • OPTIONAL: Wear plates at rear of body for longer body life
  • OPTIONAL: Removable discharge funnels (straight or conical) with optional dust bag

for easily sliding bulk goods, pallet and grain transport


Gross weight (techn.): 39 t
Axle assembly load (techn.): 27 t
Fifth-wheel load (techn.): 12 t
Tare weight: approx. 5,7 t or heavier (+/- DIN tolerance)


Internal length: approx. 10,000, 10,500, 11,500, 13,300 mm
Internal width: approx. 2,470mm
Internal height: approx. 2,000, 2,200, 2,300, 2,500 mm
Cargo volume: approx. 49, 52, 54, 57, 60, 62, 65, 76, 82 m³
Max. total width: 2,550 mm
Max. total height (unloaded): approx. 3,470 – 3,970 mm
Fifth wheel height: approx. 1,200 mm
Loading height (unloaded): approx. 1,470 mm


Welded steel frame design with rear tipping shaft
Replaceable 2” kingpin


Aluminium support jack, 2 x 12 t, mechanically operated on the right, including pivot foot, further options to choose from


SAF Intradisc axles with disc brakes
Axle load: 9 t/axle, on-road models
Wheelbase: 1,310 + 1,310 mm
Automatically lifting front axle


6x 385/65 R 22.5, 160K tyre
6x 11.75 x 22.5 steel or aluminium rim
Spare tyre not included


Brake system pursuant to EC Directives 71/320 and/or ECE R13
Two-line compressed air brake system
Wabco brake system
EBS system plus RSS stability programme
Spring-loaded parking brake on 2 axles
Steel or aluminium air tank
2 separate yellow/red brake/air line couplings
Electronic air suspension with automatic lowering device operated by inductive switch and lowering lock operated by rotary switch on semitrailer
Hose or cable connections to semitrailer tractor not included


Aluminium corner body in pallet design = smooth inside and outside, vertical front and rear walls, discharge chute not included
Reinforced front wall without excavator protection
Side and rear walls made from hollow profiles with upper frame on top
Crosspiece at back = pivoting door lock rod including actuation rod
Uniform fixed support across front wall and rear crosspiece
End-to-end floor panel with narrow cross ribs
(warping after welding may provoke minor corrugation)
Completely seal-welded inside of side walls
Combination rear wall = centrally divided double door with 1 external espagnolette and door latch each plus extra double hinged frame including automatic locking mechanism and shutoff of sliding discharge gate
1 grain feeder (approx. 400/400 mm) per door leaf with side-mounted dosing lever and water guard plate


1-tube system with screw coupling
Hydraulic hose connection to semitrailer truck not included
High-pressure front cylinder for backward tipping, tipping angle: approx. 45 degrees


Plastic roller tarpaulin incl. aluminium slat and hand crank on right in travelling direction
Horizontal tarpaulin bracket rope fastening, 3 stop brackets plus holder for rolled-up tarpaulin; tarpaulin hook at front and back with zig-zag tie fastening
3 central removable and swivelling rube crosspieces = also serve as tarpaulin support, approx. 100 mm inclination
Tarpaulin attached on left in travelling direction by means of 4 tension belts (rubber pads included) and turnbuckles on tipper body’s underside


24 V lighting system pursuant to EC Directive 76/756/EEC
2 five-chamber LED tail lights
2 LED front marker lights
2 LED rear contour lights
LED side marker lights
2 licence plate lights
2 7-pin sockets (1x DIN ISO 3731, 1x DIN ISO 1185) and 1 15-pin socket (DIN ISO 12098)
Power connection(s) to semitrailer tractor not included


Primer and top coats spray painted with 2-component acrylic varnishes for commercial vehicles
Black plastic parts not painted
Powder-coated black attachments/mountings
Hot-dip galvanised parts not painted


White reflecting contour marking strips on entire bottom length of side walls plus 2 top corners pursuant to ECE 48
Red reflecting circumferential contour marking strip at back pursuant to ECE 48


1 level gauge (to check horizontal position)
3 pairs of plastic single wheel mudguards with spray protection as per regulations
Unpainted folding trapezoidal aluminium underride protection, aluminium latch included
2 wheel chock and holders as per regulations
Removable grain feeder discharge funnel, dust bag not included, mounted on chassis
Noise dampers = rubber pads


Aluminium platform with aluminium safety grating, guard rail and ladder included
Aluminium side impact protection profiles
Spare wheel bracket not included
1 aluminium ladder, bracket included
Labelling, operating and safety instructions in German
Licence plate frame
Rear marking pursuant to ECE
CE mark of conformity

Your Schwarzmüller contact persons

Always nearby. We are delighted to help.

Premium even at customer service

From maintenance to vehicle rental