Plywood box body - up to 12 t total weight

  • Plywood box body, available in different lengths
  • Front wall and side walls made from plywood board (GRP-coated multiplex plywood)
  • Resin-coated plywood floor, 27 mm (for stacker axle loads up to 2 t)
  • Steel skirting provides impact protection at front and on both sides
  • Full-length combination lashing rail made from galvanised steel and bolted on both sides
  • GRP roof, translucent
  • Clamped/bolted subframe and cross members, hot-dip galvanised
  • OPTIONAL: Vertical liftgate with upper extending flap, for distribution transport
  • OPTIONAL: Single-leaf side door
  • OPTIONAL: Aluminium panel roof
  • OPTIONAL: Retractable steps at rear



Body weight: approx. 1.4 t


Internal length: approx. 6,100 mm
Internal width: approx. 2,490 mm
Total width: 2,550 mm

Internal height: approx. 2,410 mm
Portal loading height: approx. 2,345 mm
Portal loading width: approx. 2,420 mm

Load space internal height, body height, loading height, total height etc. can only be checked
and announced upon specification of the exact truck data


Bolted steel construction, with attached cross members,
design height approx. 210 mm, cross member spacing approx. 500 mm


Resin-coated birch plywood floor, 27 mm, flush with external frame
(floor load capacity up to 2 t stacker axle load)


Closed plywood box = front and side walls made from plywood board (GRP-coated multiplex plywood)

Steel skirting, 275 mm high = impact protection at front and on both sides

On both sides 1 row of full-length combination lashing rails made from galvanised steel and bolted, distance from floor to centre of lashing rail:
approx. 950 mm (internal width in this area: approx. 2,465 mm)

GRP roof, translucent - bow spacing approx. 600 mm
Without roof panelling

Rear steel portal frame with fully opening aluminium double door,
2 external espagnolettes per door leaf,
interior door cladding made from galvanised steel plate
Suitable for customs sealing

Box lighting with 2 recessed interior roof lights,
incl. switch operation in cab (power supply must be present)

External clearance lamps at front and rear at top


Subframe, cross members and steel rear portal hot-dip galvanised - unpainted
Complete box body incl. portal doors etc. = white (as per upstream supplier)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear
(white on sides and red at rear by default), according to ECE 48


Rear markings as per ECE standards (horizontal on rear doors/rear wall)


Rear crash guard
1 x retractable step unit at rear right
Bracket for wheel chock(s)

Your Schwarzmüller contact persons

Always nearby. We are delighted to help.

Premium even at customer service

From maintenance to vehicle rental