2-axle sliding tarpaulin platform semitrailer

  • Low corrosion, high-quality aluminium body components, tested according to EN 12642 XL
  • Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t
  • Aluminium tarpaulin mounting strips on both sides of external frame
  • Reinforced aluminium hollow profile front wall with integrated equipment bracket
  • Bolted portal at rear with aluminium corner posts and fully opening double door in profile design
  • Installation of axles from well-known manufacturers such as SAF or BPW
  • OPTIONAL: Certified according to DC Directive 9.5, certified for beverages and barrel goods
  • OPTIONAL: Version with sliding tarpaulin + side walls
  • OPTIONAL: Variable load securing via bolt-on lashing systems (airline lashing rail, perforated combination impact protection)
  • OPTIONAL: Twin-level loading system CTD III for 11 x 3 EURO pallets, load capacity: 400 kg/pallet
TYPE DESIGNATION

2-AXLE SLIDING TARPAULIN PLATFORM SEMITRAILER RH125 P

 

WEIGHTS

Gross train weight (perm.): 36 t

Gross weight (techn.): 30 t

Axle assembly load (techn.): 18 t

Fifth-wheel load (techn.): 12 t

Payload: approx. 23 - 24 t

Tare weight: approx. 5. 3 t

 

DIMENSIONS

Internal platform length: approx. 13,620 mm

Internal platform width: approx. 2,480 mm

Total width: 2,550 mm

Load space internal height: approx. 2,720 mm

Lateral loading height below guide rail: approx. 2,620 mm

Internal width between guide rails: approx. 2,430 mm

Portal loading height: approx. 2,620 mm

Portal loading width: approx. 2,480 mm

Loading height: approx. 125 mm over fifth-wheel height

 

FRAME

Welded steel frame construction

Frame for unladen fifth-wheel height of 1,090 - 1,190 mm with air-sprung STT

Replaceable 2" kingpin (EC installation dimension,

width across corners: 2,040 mm)

Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t lashing points

 

CHASSIS

Air suspension with lifting and lowering device (approx. +120/-80 mm)

Automatic adjustment of driving level from 15 km/h


air suspension unit with low-maintenance 430 mm disc brake axles

2 x 9 t rigid, wheelbase 1,310 mm


Tyres :

4 x 385/65 R 22.5 160J, manufacturer as per factory specifications

4 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

 

SUPPORT FIXTURES

Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

 

BRAKE SYSTEM

Brake system according to EC Directive 71/320 or ECE R13

Two-line brake

EBS - electronic brake system

Wabco 2S2M = one axle sensed

RSS - stability program

Spring-loaded parking brake on 2 axles

Steel air tank

 

FLOOR

Resin-coated plywood floor, 27 mm, flush with external frame

2 steel top-hat rails over the longitudinal beams

(floor load capacity 7 t, stacker axle load according to CSC)

 

ELECTRICAL EQUIPMENT

24 V lighting system according to EC Directive 76/756/EWG

2 seven-chamber tail lights in underride protection

LED side marker lights

2 clearance lamps

2 contour lights on underride protection

2 x 7-pin and 1 x 15-pin socket

 

PAINTWORK

Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)


Plastic and hot-dip galvanised parts unpainted,

powder-coated attachments/installation parts black


Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

 

ACCESSORIES

Rear markings as per ECE standards (horizontal on rear doors/rear wall)

 

ATTACHMENTS

Rear crash guard with portal post protection and lower post reinforcement

Wheel chock(s) as per regulations

1 x retractable step unit at rear right

Single wheel plastic mudguards with spray protection as per regulations

Aluminium tarpaulin mounting strips bolted on both sides of external frame.

Aluminium underride protection, coated white

Side impact protection made from aluminium profiles as per regulations, coated black

1 spare wheel bracket for 1 spare wheel (rear right)

1 plastic toolbox, lockable, unpainted , on left after axle

 

SIDE WALLS/SLIDING TARPAULIN

Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports,

2 lashing rings inside for load securing

Closed with tarpaulin over front wall, in same colour as side tarpaulin

Front wall reinforced inside with galvanised steel plate,

approx. 650 mm high


Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear,

t arpaulin sealed against external frame ,

tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability

Aramid-reinforced plastic roof tarpaulin, translucent


Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding cover, incl. fully opening double door in profile design covering entire load space height, each leaf equipped with 2 internal espagnolettes

 

POSTS/COVER

2 fixed aluminium corner posts at front, bolted, protruding from sides

3 centre posts on left in direction of travel, movable across entire length

3 centre posts on right in direction of travel, movable across entire length

4 rows of slat pockets, 1st pocket row at bottom 460 mm, spacing approx. 160/450/450 mm, with 4 rows of aluminium pointed slats 100/25 mm


Versus sliding cover with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation

Aluminium guide rail profile on both sides for sliding tarpaulins and posts, design height 140 mm

Control rod for sliding tarpaulin (bracket on interior side protection)

 

J_PSanh2ASP_PIC1.jpg
Low corrosion, high-quality aluminium body components, tested according to EN 13642 XL
J_PSanh2ASP_PIC4.jpg
OPTIONAL: Version with sliding tarpaulin + side walls
J_PSanh2ASP_PIC5.jpg
Reinforced aluminium hollow profile front wall with integrated equipment bracket
J_PSanh2ASP_PIC6.jpg
Bolted portal at rear with aluminium corner posts and fully opening double door in profile design
J_PSanh2ASP_PIC7.jpg
Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 23 pairs of recessed 2.5 t
J_PSanh2ASP_PIC8.jpg
27-mm resin-coated panel floor, flush with external frame and with 2 steel top-hat profile rails above the side members (stacker axle load 7 t)
J_PSanh2ASP_PIC9.jpg
OPTIONAL: Twin-level loading system CTD III for 11 x 3 EURO pallets, load capacity: 400 kg/pallet
J_PSanh2ASP_PIC10.jpg
OPTIONAL: Manually operated hydraulic lifting roof, 400 mm elevation for rapid loading and unloading

Your Schwarzmüller contact persons

Always nearby. We are delighted to help.

Premium even at customer service

From maintenance to vehicle rental