3-axle ultralight platform semitrailer


  • Lightweight construction with perforated side members made from special high-strength Naxtra steel
  • Reinforced aluminium hollow profile front wall with integrated equipment bracket
  • Aluminium hollow profile rear wall, 800 mm high, foldable, with 2 integrated steps
  • External frame with 23 pairs of recessed 2.5 t lashing points for load securing
  • Installation of axles from well-known manufacturers such as BPW, Mercedes or SAF
  • OPTIONAL: Portal frame with double door - bolted portal at rear with fully opening double door in panel construction
  • OPTIONAL: 2-leaf rear wall, 800 mm high - split rear wall with espagnolette, both door leafs fully opening, fixation via door stays
  • OPTIONAL: Version with sliding tarpaulin + side walls
  • OPTIONAL: Suitable for TIR customs sealing
  • OPTIONAL: Rear storage compartment between chassis frame
  • OPTIONAL: Sealed pallet box for 32 Euro pallets, with partition and door on both sides



Gross train weight (perm.): 40 t
Gross weight (techn.): 39 t
Axle assembly load (techn.): 27 t
Fifth-wheel load (techn.): 12 t
Tare weight: approx. 5. 2 t


Internal platform length: approx. 13,620 mm
Internal platform width: approx. 2,480 mm
Total width: 2,550 mm
Load space internal height: approx. 2,6 9 0 mm
Lateral loading height: approx. 2,6 3 0 mm
Rear loading height: approx. 2,6 9 0 mm
Loading height: approx. 15 0 mm over fifth-wheel height


Welded steel frame construction - lightweight design
Frame for unladen fifth-wheel height of 1,1 0 0 - 1, 17 0 mm with air-sprung STT
Replaceable 2" kingpin (EC installation dimension,
width across corners: 2,040 mm)
23 pairs of recessed 2.5 t lashing points according to UVV


Air suspension with lifting and lowering device (approx. +120/-80 mm)
Automatic adjustment of driving level from 15 km/h

air suspension unit with low-maintenance 430 mm disc brake axles
3 x 9 t rigid, wheelbase 2 x 1,310 mm

Tyres :
6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver


Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications


Brake system according to EC Directive 71/320 or ECE R13
Two-line brake
EBS - electronic brake system
Wabco 2S2M = one axle sensed
RSS - stability program
Spring-loaded parking brake on 2 axles
Aluminium air tank


Resin-coated plywood floor, 27 mm, flush with external frame
2 aluminium top-hat rails over the longitudinal beams,
(floor load capacity 5,460 kg stacker axle load according to CSC)


Fixed aluminium hollow profile front wall, 2,000 mm, with 2 centre supports,
2 lashing rings inside for load securing
Front wall reinforced inside with galvanised steel plate,
approx. 650 mm high

4-part aluminium hollow profile side walls 600/25 mm with rubber seal and bracket recess for tarpaulin overhang (360 mm), customs-compliant with tarpaulin brackets, foldable with latch-type tension locks 681-S1
Foldable aluminium hollow profile rear wall, 600 mm high, with rubber seal and bracket recess, customs-compliant with tarpaulin brackets, with latch-type tension locks 681-S1
Folding step


2 front corner posts, bolted, protruding from sides, 2,300 mm high
6 foldable centre posts, s plit
2 rear corner posts, bolted to sides, 2,300 mm high
5 rows of softwood slot-in slats, 100/27 mm, in pockets, spacing:
1 x 400 mm, then 200 mm, 1 slat at front

Edscha sliding tarpaulin frame, forward-sliding = pushed together in loading area, design height 95 mm
Edscha control rod, adjustable (bracket on interior side protection)

Tarpaulin made from high-strength Trevira fabric with translucent roof, incl. tarpaulin rope and assembly, tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability


24 V lighting system according to EC Directive 76/756/EWG
2 seven-chamber tail lights in underride protection
LED side marker lights
2 clearance lamps
2 contour lights on underride protection
2 x 7-pin and 1 x 15-pin socket


Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)

Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts black

Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48


Rear markings as per ECE standards (horizontal on rear doors/rear wall)


Rear crash guard with corner post protection
Wheel chock(s) as per regulations
Single wheel plastic mudguards with spray protection as per regulations
Aluminium underride protection, coated white
Side impact protection made from aluminium profiles as per regulations, coated black
1 spare wheel bracket for 1 spare wheel (rear right)
1 plastic toolbox, lockable, unpainted , on left after axle

Ihre Schwarzmüller Ansprechpartner

Immer in Ihrer Nähe. Wir sind gerne für Sie da.

Premium auch beim

Von der Instandhaltung bis zum Mietfahrzeug.