Platform body - medium series

  • Clamped/bolted subframe and cross members, hot-dip galvanised
  • Aluminium hollow profile rear wall, 800 mm high, foldable, with 2 integrated folding supports
  • External frame with 11 pairs of recessed lashing points for load securing
  • Resin-coated plywood floor, 30 mm, for stacker axle loads up to 2.5 t
  • OPTIONAL: Vertical liftgate with upper extending flap, for distribution transport
  • OPTIONAL: Bolted portal frame at rear incl. full-length, fully opening double door
TYPE DESIGNATION

PLATFORM BODY - UP TO 14 T TOTAL WEIGHT

 

WEIGHTS

Body weight: approx. 1.2 t

 

DIMENSIONS

Internal platform length: approx. 6,100 mm

Internal platform width: approx. 2,480 mm

Total width: 2,550 mm


Load space internal height: approx. 2,000 - 2,300 mm


Load space internal height, body height, loading height, total height etc. can only be checked

and announced upon specification of the exact truck data

 

FRAME

Clamped/bolted steel construction,

with attached cross members - design height approx. 210 mm

11 pairs of recessed lashing points according to UVV

 

FLOOR

Resin-coated birch plywood floor, 30 mm, flush with external frame

(floor load capacity up to 2.5 t stacker axle load)

 

PAINTWORK

Blasted with steel granulate, treated with zinc dust primer and spray painted

2-component acrylic paints for commercial vehicles (standard RAL or truck colour)


hot-dip galvanised - unpainted = subframe and cross members


Plastic and hot-dip galvanised parts unpainted,

powder-coated attachments black


Reflective contour marking strips across entire length of sides (continuing onto truck cab) and all-round contour marking at rear

(white on sides and red at rear by default), according to ECE 48

 

ACCESSORIES

Rear markings as per ECE standards

 

ATTACHMENTS

Rear crash guard

Side wall stop buffer

Bracket for wheel chock(s)

 

SIDE WALLS

Fixed aluminium hollow profile front wall, 1,700 mm, with 2 full-height centre supports

Front wall reinforced inside with 3/5 mm aluminium chequer plate, approx. 650 mm high


2-part aluminium hollow profile side walls, 600/25 mm,

with rubber seal and bracket recess for tarpaulin overhang (360 mm),

with French tarpaulin brackets, spacing approx. 400 mm (not customs-compliant),

foldable with latch-type tension locks 681-S1

Foldable aluminium hollow profile rear wall, 600 mm high, with rubber seal and bracket recess, customs-compliant with tarpaulin brackets,

with latch-type tension locks 681-S1

Folding step

 

POSTS/COVER/TARPAULIN

2 front corner posts, bolted to front, 1,700 mm high

2 foldable centre posts, 1,800 mm high, split

2 rear corner posts, bolted to sides, 1,700 mm high

3 rows of softwood slot-in slats, 100/27 mm, in pockets, spacing: 400/2 x 200 mm


Fixed pole roof with 6 rows of longitudinal pipes, 60 mm, and transverse bows for posts.


Tarpaulin made from high-strength Trevira fabric with translucent roof, all-round rubber tensioner, tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability

 

Your Schwarzmüller contact persons

Always nearby. We are delighted to help.

Premium even at customer service

From maintenance to vehicle rental